Innovations in Heating and Cooling
It’s not a secret that your car’s engine performs best when it is at a warmer temperature. The heat has to go somewhere. Radiators are the answer.
A cooling system makes use of refrigerant, fans and ductwork to distribute air. Heating systems make use of fuel sources like gasoline or oil to heat the air.
Variable-Speed Technology
When it is about cooling and heating variable speed technology, it is one of the most significant innovations of recent the past few years. The technology is utilized by the blower motor in gas furnaces and air handlers to operate at different speeds that control airflow throughout your home. This technology is designed to help eliminate cold and hot spots, and also enhance dehumidification during those hot summer months in the south.
The idea behind variable-speed technology is to match the output of your system to your home’s energy needs. The majority of people don’t drive their vehicle in only one gear. Instead, they’d shift gears in accordance with the demands of driving the vehicle or road conditions. This is also true for your home. Variable speed systems provide homeowners and contractors a broad range of benefits including energy savings, less noise levels, improved indoor air quality and potential for utility company rebates.
Variable-speed technology lets your system work more efficiently in low load situations. This is because the traditional systems utilize a setpoint, at the desired temperature, before cycling off. When the home’s temperature rises it is then cycled on to bring it back to your desired temperature. The constant cycle uses up an enormous amount of energy, particularly since the unit is starting up at full capacity.
With a variable speed system, the compressor is operating at a lower than full capacity for extended periods of time and expends much less energy. The result is that your system can save up to 30 percent on energy costs.
The use of variable speed technology in combination with other energy-saving improvements like zoning systems or smart controls can improve the efficiency and performance of your system. Contact our expert team to determine whether a system featuring variable speed technology and Greenspeed Intelligence is the right choice for your home.
We can help you to make the best choice for your home. We will discuss the advantages of a variable speed system and how it can be used in conjunction with other energy-efficient products to produce the best results. Our licensed HVAC professionals have the knowledge to guide you through the selection process. Contact us today to learn more about our line of cutting-edge variable speed heating and cooling systems backed by Carrier.
Wi-Fi(r), Controls
Smart thermostats that are wireless allow homeowners to take greater control over their HVAC systems while also reducing energy costs and increasing comfort. These thermostats use wireless communications to connect with a computer or smartphone app giving users the ability to monitor and adjust the temperature of their home remotely. They can also learn household habits and automatically alter schedules, reducing energy consumption when no one is home, or increasing comfort once residents return.
Smart thermostats allow you to monitor your system at all times. They can even detect when you’re away from the home and switch to an energy-saving ”Away” mode to help reduce your power bill. Then, once you are back at home they will switch back to your regular Home setting to ensure optimal comfort.
The Wi-Fi(r) controls are more advanced than standard programmable thermostats and come with additional convenience features, such as emails, remote system monitoring and a customizable web portal that acts as your thermostat. They also let you control multiple zones from the same device. These are great to manage a rental or vacation home from distance.
A thermostat that can be programmed can be programmed to regulate the temperature in different times of the day to provide optimal comfort for homeowners and renters. It can be hard to keep up with the scheduling of a thermometer that is programmable, especially with busy schedules and children’s activities. A smart thermostat with sensors in it tracks occupancy in rooms temperature, indoor and outdoor temperatures, humidity and temperatures to monitor the current conditions. It also tracks the energy consumption of your home to determine whether cooling or heating are required and adjusts accordingly.
Sensors and intelligent programming of the Wi-Fi(r) control can cut down your home’s energy consumption by up to 10%. They can not only reduce your energy bills, but also reduce your carbon footprint, and contribute to a healthier environment.
ENERGY STAR(r) Certification
ENERGY STAR has become one of the most recognizable and easily recognized labels across the United America. You’ll see it on your refrigerators, light bulbs and other appliances. If you purchase products bearing the ENERGY STAR logo, you know they’re independently tested and verified to meet the strict energy efficiency specifications and reduce greenhouse gas emissions.
The same standards that are applicable to individual products can also be applied to entire buildings. To be eligible for ENERGY STAR, buildings must perform at least 15% better than ASHRAE 90.10-2010 (or state building codes). The performance goal is determined by a variety of factors that influence energy usage, including the weather conditions and occupancy. It also takes into consideration the size and type of heating and cooling systems.
A home must be independently checked by a HERS Rater in order to qualify for Energy STAR Certification. The HERS Rater inspects the insulation, air barrier, and HVAC equipment to make sure that they are installed and sized correctly. The Rater also conducts thorough inspections of duct and ventilation leakage.
All of these steps are designed to help homeowners save money and energy while also protecting their health and the environment. This is what makes ENERGY STAR certification a great way to increase the value of any apartment or home. Research has shown that the ENERGY STAR approved apartments and homes are usually sold or rented for higher prices than those without the certification.
ENERGY STAR-certified buildings are not just more energy efficient, but also have lower operating costs. They also feel more comfortable and use less electricity. The EPA estimates that ENERGY certified homes are able to save Americans $39 billion per year in energy costs.
High-Efficiency Systems
A high-efficiency HVAC system is more than just a way to cut down on your energy bills. It’s also a fantastic method to reduce carbon emissions and improve the environment. High-efficiency systems consume as much as a third less energy than older models, which results in lower utility bills and substantial energy savings. High-efficiency systems cut greenhouse gas emissions and utilize environmentally friendly, non-toxic refrigerants that are ozone-friendly.
It could cost more to install a new high-efficiency, energy-efficient system than a previous model. However it will pay for itself over time through lower cost of energy and maintenance. It could also boost the value of your home, making it easier to sell.
High-efficiency systems can provide a wide range of benefits, including increased comfort, quieter operation, and improved indoor air. Advanced filtration systems, for example, remove more harmful contaminants. The systems can improve occupant comfort as they provide precise temperature control, removing hot or cold spots.
Heating and cooling consume about 45% of the energy consumed by the average household. Replacing your outdated HVAC system with a high-efficiency unit will start saving you energy costs from the first bill you receive. The annual fuel utilization efficiency rating (AFUE) will assist you in locating the Carrier AC or furnace that is best suited to your needs. The higher the AFUE rating is, the more efficient the unit is.
New energy-efficient furnaces can achieve up to 98% AFUE and convert all the heat energy generated by the fuel source into warmth for your home. This is a huge improvement over traditional furnaces which operate at an AFUE of 80% and waste 35 percent of their fuel.
High-efficiency units use less energy and produce less greenhouse gases than previous models, thereby helping to save the planet. They can also use non-toxic refrigerants that eliminate the need to create chemical products that damage the Ozone layer. Building owners and contractors can reduce the environmental impact of their projects by incorporating high-efficiency systems into green construction projects. These systems also aid in reducing construction costs, making them a smart investment for builders and occupants alike.
