Innovations in Heating and Cooling
It’s no secret that the engine of your car is most efficient when it’s warm. But that heat needs to go somewhere. That’s where the radiator comes in.
A cooling system utilizes refrigerant, fans and ductwork to distribute the air. Heating systems make use of fuel sources like oil or gasoline to warm the air.
Variable-Speed Technology
When it is about cooling and heating, variable speed technology is among the most significant developments in years. It is used by the blower motor in both gas furnaces and air handlers to operate at various speeds that regulate airflow throughout your home. This technology is designed to ensure a more evenly distributed air throughout your home, reducing hot and cold spots.
The idea behind variable-speed technology is to match your system’s output to the energy requirements of your home. The majority of people don’t drive their vehicle in a single gear. Instead, they would shift gears in accordance with the demands of driving the vehicle or the road conditions. This is also true for your home. Variable speed systems can provide homeowners and contractors a vast range of benefits including energy savings, lower noise levels, better indoor air quality and potential for utility company rebates.
Variable-speed technology also allows your system to work more efficiently in low load conditions. This is because traditional systems work with a set temperature and then attaining the desired temperature and then cycling off. The system will return to the cycle when the temperature in your home reaches the desired level of comfort. This continuous cycling uses lots of energy since the system is restarting at full capacity.
A variable-speed system allows the compressor to run at a lower rate for longer durations, using less energy. The system could save you up to 30% on energy costs.
Variable speed technology can be used in conjunction with other energy efficiency upgrades like zoning systems and smart controls to improve the efficiency of your system and performance. Contact our team of experts to determine if a system using Greenspeed Intelligence and variable speed technology is right for your home.
We can assist you in making the right decision for your home, by explaining the advantages of a system with variable-speed technology and how it can be used with other energy-efficient products to provide the best results. Our certified HVAC experts can help you navigate the process of choosing the right system. Contact us now to learn more about our innovative Carrier-backed variable speed heating and cooling system.
Wi-Fi(r), Controls
Wireless smart thermostats allow homeowners greater control over their HVAC system, reducing energy consumption and enhancing comfort. These models utilize wireless technology to connect via a smartphone app or a computer, allowing users to monitor and adjust their home’s temperature remotely. Based on the model the devices are able to recognize patterns of household behavior and automatically alter schedules to minimize energy use when no one is home or maximize comfort when residents are home.
Smart thermostats are easy to use and let you monitor your system at any time. They can even tell when you’re away from your home and will enter an energy-saving ‘Away’ mode to help reduce your power bill. Then, once you are back at home, they will return to the normal ‘Home’ setting for optimal comfort.
In comparison to conventional thermostats, Wi-Fi(r) controls are more advanced and include additional convenience features such as email alerts, remote monitoring of the system, a customized web portal that behaves like your thermostat, and the capability to control multiple zones with one device. They are perfect for managing a rental or vacation home from afar.
A programmable thermostat can be programmed to regulate the temperature at different times of the day, ensuring optimal comfort for homeowners and renters. It can be hard to keep track of the scheduling of a programmable thermometer particularly with busy schedules and children’s activities. Smart thermostats that have sensors built-in track the occupancy of rooms, indoor temperatures, and outdoor humidity to monitor real-time conditions. It also tracks your energy usage to determine if cooling or heating are required and makes adjustments accordingly.
Sensors and smart programming of the Wi-Fi(r) control can cut down your home’s energy consumption by up to 10 percent. They not only help reduce your energy bills, but also lower your carbon footprint, and contribute to a cleaner environment.
Energy START(r) Certification
ENERGY STAR is one of the most well-known and widely recognized labels in the United States. It’s that little blue label you find on your fridge, light bulbs and other appliances. You can be assured that products bearing the ENERGY STAR label have been independently tested to make sure they comply with strict energy efficiency standards and help reduce greenhouse gas emissions.
The same guidelines that apply for individual products can also be applied to a building’s entire. To obtain the ENERGY STAR certification buildings must show at least 15% more performance than the ASHRAE 90.1-2010 (or the state building code that it is allowed). The performance goal takes into account a number of factors that impact the energy use of buildings, such as weather conditions, occupancy and heating and cooling system size and type.
To be eligible for the ENERGY STAR certification, a structure must be verified by a HERS Rater. The HERS Rater checks the insulation of the home, as well as the air barrier and HVAC equipment to make sure that they are sized and installed correctly. The Rater conducts thorough inspections of the ducts and ventilation.
These actions can help homeowners save money and energy while protecting their health and environment. This makes ENERGY STAR an excellent way to add value for any apartment or home. Research has shown that the ENERGY STAR approved apartments and homes are usually rented or sold at higher prices than those that do not have the certification.
Buildings that are certified by ENERGY START are not just more energy efficient, they also have lower operating costs. They are also more comfortable to live in and use less energy. In turn, the EPA estimates that ENERGY homes with ENERGY STAR ratings will save Americans over $39 billion in energy costs each year.
High-Efficiency Systems
A high-efficiency HVAC is more than an opportunity to lower your energy costs. It also has the potential to aid the environment and cut down on carbon emissions. High-efficiency systems use up to a third less energy than earlier versions, which results in lower energy bills. In addition to decreasing greenhouse gas emissions high-efficiency systems are made of non-toxic refrigerants that don’t damage the Ozone layer.
A high-efficiency model may cost more upfront than a previous model, but it will pay for itself through energy savings and maintenance costs over the course of the life of the system. It could also boost the value of your home, making it easier to resell.
High-efficiency systems can provide a wide range of benefits including improved comfort, quieter operation, and improved indoor air. Advanced filtration systems, for example can remove harmful contaminants. These systems can enhance occupant comfort as they provide precise temperature control, removing cold or hot patches.
Heating and cooling account for 45percent of the electricity consumed by the average household. Installing a new HVAC system with a more efficient unit will start saving you energy costs from the first bill you receive. You can easily locate an Air conditioner or AC that meets your needs by determining the annual fuel utilization efficiency (AFUE) rating. The higher the AFUE, the greater the efficiency.
New energy-efficient furnaces can achieve up to 98% AFUE, which means that they convert all the energy used to heat the fuel source into warmth for your home. This is a vast improvement over conventional furnaces that operate at only 20% AFUE and waste 35% of the fuel they burn.
High-efficiency units consume less energy than their earlier counterparts, causing fewer greenhouse gas emissions, and also helping to preserve the environment. They can also use non-toxic refrigerants, which eliminate the need to produce chemical products that harm the ozone layer. By incorporating high-efficiency systems into green construction projects, contractors and building owners can reduce their environmental impact. These systems can also reduce construction costs and make it a wise investment for builders as well as building owners.